ok will wire it up and try it out.Thanks!
EDIT- Ya it work great!
Search found 8 matches
- Thu May 21, 2020 10:20 pm
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
- Thu May 21, 2020 8:54 pm
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
Re: Arduino Mega lite shield and TB6600 clone axis
https://openbuildspartstore.com/xyz-touch-probe-plus/ Hi just picked this ^ up from OpenBuilds. Do have a idea or have had a look at it for connecting to the MEGA lite board. This has 3 wires red, blue and black. Port on board has 2 connections.I am thinking RED wire goes to 5VDC to probe port and ...
- Mon May 04, 2020 9:23 am
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
Re: Arduino Mega lite shield and TB6600 clone axis
Ok well maybe it was borked on delivery. I'll have to pay better attention before I wire it up. Thanks!
- Sun May 03, 2020 12:42 pm
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
Re: Arduino Mega lite shield and TB6600 clone axis
Hi got a silly question for you. So I bought the https://www.amazon.com/gp/product/B06XCVY3GM/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 So I think I might of borked the converter I reversed the PWM 5vdc lead from mega to the converter. Since there is a Opti coupler on it would the 5 volts...
- Fri Jan 31, 2020 10:08 am
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
Re: Arduino Mega lite shield and TB6600 clone axis
Hi again! I got the machine up and running and successfully homed to what I might believe might be home. I did have a couple of crashes and trashed some limit switches but that was my fault! And I am still working out the GRBL settings. I have a question about the Spindle Enabled. So I bought a 500w...
- Sun Jan 26, 2020 9:30 pm
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
Re: Arduino Mega lite shield and TB6600 clone axis
Thanks again! I appreciate the pic that helps out a lot!
- Sun Jan 26, 2020 12:42 pm
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
Re: Arduino Mega lite shield and TB6600 clone axis
Thanks of the fast reply. I'm thinking I don't need the DR EN. Maybe nice to have for? Easy enough to wire if I need. One more question so wired up the Opti Isolator to the mega shield. The wires from X, Y and Z ports from the isolator to the shield is only one wire? On the mega lets say for Y axis ...
- Sat Jan 25, 2020 5:11 pm
- Forum: GRBLDuino
- Topic: Arduino Mega lite shield and TB6600 clone axis
- Replies: 12
- Views: 11604
Arduino Mega lite shield and TB6600 clone axis
Hi, So I have your Mega lite shield with 4 TB6600 Drivers. I would like to clone the Y axis for 2 steppers. Do I just daisy chain a jumper from Y axis "step" and "dir" to the appropriate ports of both TB6600 driver? And does ENA on the driver matter? I notice on the Mega shield t...